Trouble with CH5 Code
Displaying 1-3 of 3
| Nov 10th 2017, 22:28 | |
AB1ZKTotal Topics: 0 Total Posts: 0 |
I have had the PIC programming for beginners for awhile (2010). While I have used the book to learn, I have not built any projects till now. I can not get ch5 code to work. The lights do not blink. The message gives a code 202. I am just using the code off the CD. Any idea's ? I have checked the circuit and the 5 volts is to the chip, but not action from the leds. The leds do light if the 470 ohm is connected to the 5 volt source. Marc |
| Nov 11th 2017, 11:20 | |
W1VTSuper Moderator Total Topics: 0 Total Posts: 0 |
I don't see that particular issue, but you may want to note the issues on the product notes page. http://www.arrl.org/product-notes Zack Lau W1VT ARRL Senior Lab Engineer |
| Nov 11th 2017, 15:04 | |
AB1ZKTotal Topics: 0 Total Posts: 0 |
Zack, Thanks for the info. I tried the "work around" for programming and the problem is solved. If possible, a "cleaner" solution with a permanent fix to the hardware (FET) would be best. 73, Marc |
Displaying 1-3 of 3
